| Industrial | Agricultural | Heavy Duty |
|
|
||
|
|
||
|
Application and proper use is the key to successful results with CA- 40
|
|
 |
1. Test and document your mileage
before you add CA-40. 2. When you’re ready to add CA-40 to your fuel tank, make sure you shake the bottle very well (also be sure to shake well before sepa- rating CA-40 into any smaller containers). Keep CA-40 stored at room temperature. Do not attempt to dispense without warming if CA-40 is subjected to freezing temperatures.3. Find out how much fuel your tank uses (you can look in the owner’s manual or call a dealer). Treat at a rate of 1 ounce CA-40 to 15 gal- lons of fuel for your initial treat rate or 2ml CA-40 per gallon of fuel.4. Pour in the CA-40 BEFORE adding fuel in order to flush the addi- tive down the filler tube (otherwise, it might not all make it into the tank). Fill your tank with fuel (put in enough CA-40 to treat the whole tank the first time you use it). Some people inject CA-40 directly into the (upright) fuel pump nozzle and then add fuel.5. After the initial treatment, treat only the fuel you put in each time. It is NOT better to over-treat the fuel. Conversely, if you add too little CA-40 (less than 1 ounce to 20 gallons), you will see no results.6. For measuring devices, we recommend using the A&I Products CA-40 Application Kit, A-CA40-AK, or a similar measuring appara- tus. Be sure to take note of the measuring lines, and if not using the CA-40 Application Kit, whether it is measured in SAE or metric.7 . You may also want to keep a smaller amount of CA-40 in a small plastic wide-mouth jar for easier dispensing.8. Keep the product in a cardboard or plastic box with a rag or paper towels for clean-up. Dish soap will work well for cleaning devices used with CA-40. The product is very safe to handle.9. If you see no significant improvement after a few tanks treated with CA-40, you may want to consider resetting the onboard computer on your vehicle. Speak to your mechanic or contact us before at tempting this.10. Please contact us by e-mail at sales@aiproducts.com or by phone at 888-USE-CA40 if you have any questions or concerns.
|
| For best results (particularly when
using in bulk tanks), we now recommend pre-mixing CA-40 with the type of
fuel you plan to add it to. Use a ratio of 1 part CA-40 to 2 parts fuel.
Then, add the pre-mixed fuel to your tank at a rate of 1 ounce premix to
5 gallons of fuel.
|
|
| For example, dump the entire contents of a quart bottle of CA-40 in an empty 2 ½ gallon gas can. Then add 2 quarts of gas. Then add the premix to your tank at a rate of 1 ounce pre-mix to 5 gallons of fuel. Be sure to keep your pre-mix in a designated gas can at home. Do not carry gas in your vehicle. You can add the pre-mix to your tank at home after refueling.
|
|
|
|
|
